<aside> 1️⃣

If you've had a disconnection, first power cycle the Hub (unplug, wait 10sec, replug) to refresh. (If not, proceed directly to step 2!)

</aside>

<aside> 2️⃣

Open your internet browser on your computer and navigate to your Hub's IP address, adding /manager at the end (e.g. 192.168.0.47/manager, see image below) - the Hub IP is shown on the app Manage Devices > Hub page (as below).

Firmware update app.png

</aside>

<aside> 3️⃣

In the first box 'Moggie Base Firmware Update' upload this file:

HT2227_ESP32_V1.1.12.bin

</aside>

<aside> 4️⃣

Click 'Update!' - it should say 'upload successful' - repeat if not (until it works).

Firmware update page.png

</aside>

<aside> 5️⃣

Click 'return to homepage' and check the numbers now read 1.1.12, 1.1.5 on the page, and your ESP version should have changed in the app (see images below)

Firmware update page.png

Firmware update app.png

</aside>

<aside> 💬

If you need any further assistance please contact us at [email protected]

</aside>